How to Fix Mastercam X7 No Sim Found Error
Mastercam X7 is a powerful CAD/CAM software that allows you to design and machine complex parts with precision and efficiency. However, some users may encounter a common error message when they try to run the program: \"No sim found\". This error means that Mastercam cannot find the virtual USB device that acts as a license key for the software. Without this device, Mastercam will not work properly.
Fortunately, there are some simple solutions to fix this error and get Mastercam X7 running smoothly on your computer. In this article, we will show you how to fix Mastercam X7 no sim found error on Windows 7, 8, and 10.
What Causes Mastercam X7 No Sim Found Error?
The main cause of Mastercam X7 no sim found error is that the program cannot access the Disable Driver Signature Enforcement mode on your computer. This mode is required for Mastercam to install and use the virtual USB device that serves as a license key. If this mode is not enabled, Mastercam will not recognize the device and will display the error message.
Mastercam X7 No Sim Found Crack
There are several reasons why Mastercam may not be able to access the Disable Driver Signature Enforcement mode on your computer. Some of them are:
Your computer has a security software or antivirus program that blocks Mastercam from accessing the mode.
Your computer has a corrupted or outdated driver that prevents Mastercam from accessing the mode.
Your computer has a hardware or software issue that interferes with Mastercam's operation.
How to Fix Mastercam X7 No Sim Found Error on Windows 7?
If you are using Windows 7, you can try the following steps to fix Mastercam X7 no sim found error:
Restart your computer and press F8 repeatedly during the boot process.
Select Disable Driver Signature Enforcement from the list of options and press Enter.
Run Mastercam X7 and see if the error is resolved.
This is a temporary solution that will allow you to use Mastercam X7 until you restart your computer again. To make this solution permanent, you need to do the following:
Open the Run dialog box by pressing Windows + R keys on your keyboard.
Type gpedit.msc and press Enter to open the Local Groups Policy Editor.
Under User Configuration, expand Administrative Templates and then System.
Click on Driver Installation and then double-click on Code Signing For Device Drivers in the right pane.
Select Enabled in the new window that appears.
Under Options, select Ignore from the drop-down menu.
Click Apply and OK.
Restart your computer and run Mastercam X7 without any errors.
How to Fix Mastercam X7 No Sim Found Error on Windows 8 or 10?
If you are using Windows 8 or 10, you can try the following steps to fix Mastercam X7 no sim found error:
Go to Start -> Settings -> Update & Security -> Recovery -> Advanced Startup and click on Restart Now.
Select Troubleshoot -> Advanced options -> Startup Settings and click on Restart.
Press F7 on your keyboard to select Disable Driver Signature Enforcement from the list of options.
Run Mastercam X7 and see if the error is resolved.
This is also a temporary solution that will allow you to use Mastercam X7 until you restart your computer again. To make this solution permanent, you need to do the following:
Open an elevated command prompt by pressing Windows + X keys on your keyboard and selecting Command Prompt (Admin) or PowerShell (Admin) from the menu.
Type bcdedit /set testsigning on and press Enter.
Type bcdedit /set nointegritychecks on and press Enter.
Restart your computer and run Mastercam X7 without any errors.
Conclusion
Mastercam X7 no sim found error is a common 0efd9a6b88